BrandWEIDA

Product originChina

Delivery time45 days

Supply capacity10GWH

Industrial and commercial energy storage systems BESS Standardized and pre-fabricated design reduces customization time and construction costs, and reduces safety hazards caused by local installation differences and management risks. Meet the application requirements of regional power grid peak regulation, frequency regulation, voltage regulation, emergency response, new energy consumption, etc.to ensure the normal operation of the power system.

Solar and Energy Storage – The Answer to your Expensive Utility Bill

There are two parts to your industrial and commercial electricity bill

1.Energy charges are based on the amount of kilowatt hours of energy consumed.

2.Demand charges are based on the highest (peak) amount of power a customer uses during the month (the demand charge is the highest average kW measured in a utility-specified interval, typically 15-minutes, during the billing period).

Any sudden increase in power usage like air conditioners, manufacturing equipment, elevators, etc. can result in a spike in a customer’s power usage and increase in their overall energy bill, even if the spike is relatively short in duration.

Spikes in power usage can be difficult to predict, making it frustrating and difficult for most commercial customers to understand what drives their peak demand usage. Those spikes can cost you $100s-$1000s a month in peak demand charges and in some cases can represent more than 50 percent of a company’s monthly utility bill, significantly affecting their bottom line.

Save with energy storage

Guaranteed Savings with a Commercial Energy Storage System

Slash Peak Demand Charges with Energy Storage

With energy storage systems for commercial and industrial use, when your electricity demand starts to surge, the intelligent predictive controller triggers a rapid discharge of the energy storage system to offset the peak. The result is that your needs are reduced. This allows operators and owners of businesses and plants to control their energy bills and bottom line without spending a lot of time managing their systems. The system handles all the complexities associated with managing electricity consumption.

Reduce Base Energy Charges with Solar

With a solar power system your facility generates electricity during daylight hours reducing your base energy charges and charging your energy storage system to support reduction of Peak Demand Charges. This allows commercial and industrial building owners and operators to take advantage leverage both solar and storage to reduce base energy charges.

Figure: European gas prices have risen sharply (€/MWh)

Energy Storage + Solar = Triple Benefits

By combining industrial and commercial energy storage systems with solar energy, companies both save energy and reduce peak demand, and receive triple incentives.

Benefit from a 30% tax credit for solar and storage investments (varies by country and region)

The economic benefits of selling surplus clean energy to electric utilities.

Equipment depreciation gains.